High Security Electric Release

• Fail locked/secure applying current to the strike causes the jaw to pivot back, allowing the latch to clear the strike and the door to be opened from the outside
• Fail unlocked/safe the jaw remains locked while a current is applied to it. When the current is broken, the jaw pivots back, allowing the latch to clear the strike and the door to be opened from the outside
• Current can be controlled by keypad, keyswitch or any access control system

Voltage
12Vdc

Current
243mA @ 12Vdc

Solenoid
Solenoids rated for continuous use.

Monitoring
None

Holding Force
680kg Static Strength Rating

Endurance
Cycle tested to 1,000,000 operations

Environment
Operational temperature range - 20°C to +60°C
Weather resistant (IP56)

Body
Solid Stainless Steel Construction

Keeper
Stainless Steel

Specification Statement
The electric strike must be suitable for surface mount applications for use with rim or surface mount door locks. Where Power To Lock and Power To Open functions may be required in the same building, an individual strike is interchangeable from either "Power to Lock" or "Power to Open" on site.

The electric strike should not consume current greater than 243mA @ 12Vdc. Certifications must include CE and C-Tick.

The strike should be tested to 1 million operations and have a minimum holding force not less than 680kg.